KEY TO SYMBOLS
Symbols
WARNING!
Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with applicable
EC directives.
Cutting tool. Do not touch the tool without first switching off the engine.
This machine is not electrically insulated. If the machine touches or comes close to
death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the
greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if
they are wet. Always keep a distance of at
least 10 m between the machine and
This machine can be dangerous! The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.
Arrows which show limits for handle positioning.
Always wear approved protective gloves.
Wear sturdy,
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.
Other symbols/decals on the machine refer to special certification requirements for certain markets.
Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
2 – English
