MAINTENANCE |
| TECHNICAL DATA |
Maintenance schedule
Below follows some general maintenance instructions.
If you need further information please contact your service workshop.
Technical data
Weight |
|
Weight without fuel, Lbs/kg | 2,0 |
Blades |
|
Length, mm | 550 |
Daily maintenance
1.Check that the blades do not rotate while idling or when the choke is in the start position.
2.Check that the hand guard is not damaged. Replace the guard if damaged.
Weekly maintenance
1.Fill the gearbox with grease. This should be carried out after approxi- mately every 20 working hours.
2.Check that the bolts keeping the blades together are tightened.
A | 1 |
| |
| B |
2 |
|
1 |
2 |
Blade speed, Cut/min | 4184 |
English – 11
