TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to a service center
| PROBLEM | CAUSE | CORRECTION | ||
|
|
|
|
|
|
| Loss of power | 6. | Faulty spark plug. | 6. | Clean and regap or change |
| (continued) |
|
|
| spark plug. |
|
| 7. | Dirty fuel filter. | 7. | Replace fuel filter. |
|
| 8. | Stale or dirty fuel. | 8. | Empty fuel tank and refill tank |
|
|
|
|
| with fresh, clean gasoline. |
|
| 9. | Water in fuel. | 9. | Empty fuel tank and carbure- |
|
|
|
|
| tor, refill tank with fresh gas- |
|
|
|
|
| oline and replace fuel filter. |
|
| 10. Spark plug wire loose. | 10. Connect and tighten spark | ||
|
|
|
|
| plug wire. |
|
| 11. Dirty engine air screen/fins. | 11. Clean engine air screen/fins. | ||
|
| 12. Dirty/clogged muffler. | 12. Clean/replace muffler. | ||
|
| 13. Loose or damaged wiring. | 13. Check all wiring. | ||
|
| 14. Carburetor out of adjustment. | 14. See “To Adjust Carburetor” | ||
|
|
|
|
| in Service and Adjustments |
|
|
|
|
| section. |
|
| 15. Engine valves out of | 15. Contact a qualified service | ||
|
|
| adjustment. |
| center. |
|
|
|
|
|
|
| Excessive | 1. | Worn, bent or loose blade. | 1. | Replace blade. Tighten blade |
| vibration |
|
|
| bolt. |
|
| 2. | Bent blade mandrel. | 2. | Contact a qualified service |
|
|
|
|
| center. |
|
| 3. | Loose/damaged part(s). | 3. | Tighten loose part(s). |
|
|
|
|
| Replace damaged parts. |
|
|
|
|
|
|
| Engine dies when | 1. | Reverse operation system | 1. | Turn ignition key to |
| tractor is shifted |
| (ROS) is not "ON" while |
| ROS "ON" position. |
| into reverse |
| mower or other attachment |
| See Operation section. |
|
|
| is engaged. |
|
|
|
|
|
|
|
|
| Engine continues | 1. | Faulty | 1. | Check wiring, switches and |
| to run when |
| presence control system. |
| connections. If not corrected, |
| operator leaves |
|
|
| contact a qualified service |
| seat with |
|
|
| center. |
| attachment |
|
|
|
|
| clutch engaged |
|
|
|
|
|
|
|
|
|
|
| Poor cut - uneven | 1. | Worn, bent or loose blade. | 1. | Replace blade. Tighten blade |
|
|
|
|
| bolt. |
|
| 2. | Mower deck not level. | 2. | Level mower deck. |
|
| 3. | Buildup of grass, leaves, and | 3. | Clean underside of mower |
|
|
| trash under mower. |
| housing. |
|
| 4. | Bent blade mandrel. | 4. | Contact a qualified service |
|
|
|
|
| center. |
|
| 5. | Clogged mower deck vent | 5. | Clean around mandrels to |
|
|
| from |
| open vent holes. |
|
|
| and trash around mandrels. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
29
