6

12

3

1. Gear Shift Lever

2.Neutral Lock Gate

3.Adjustment Bolt

1. Steuerknüppel

2.Verschlussperre in Leerlaufstellung

3.Einstellbolzen

1. Levier de changement de vitesse

2.Encoche de position neutre (point mort)

3.Vis de réglage

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral (N) position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

EINSTELLUNG DES SCHALTHEBELS DES DIFFERENTIALGETRIEBES

Das Differentialgetriebe muß sich in Leerlaufstellung befinden, wenn der Schalthebel in der Neutral-Stellung (N) (Verschlußsperre) steht. Diese Einstellung wird bereits vom Hersteller im Werk durchgeführt. Sollte es jedoch dennoch erforderlich sein, weitere Einstellungen vorzunehmen, so muß folgendermaßen vorgegangen werden:

•Zunächst muß sichergestellt werden, daß sich das Differentialgetriebe in Leerlaufstellung (N) befindet.

HINWEIS: Wenn die Hinterräder des Traktors frei beweglich sind, ist das Getriebe immer in Leerlaufstellung.

•Den vorne auf dem rechten Hinterrad befindlichen Einstellbolzen lockern.

•Nun den Schalthebel in die Leerlaufstellung (N) bringen.

•Den Einstellbolzen wieder fest anziehen.

HINWEIS: Falls eine größere Bewegungsfreiheit benötigt wird, um an den Einstellbolzen zu gelangen, ist es ratsam, die Mäherplattform in die niedrigste Stellung abzusenken.

REGLAGE DE LA POSITION NEUTRE (POINT MORT) DU LEVIER DE CHANGEMENT DE VITESSE DES BOITES MECANIQUES.

La boîte de vitesse mécanique doit se trouver au point mort lorsque le levier de changement de vitesse se trouve dans l'encoche de position neutre (N). Le réglage de la position du levier est effectué en usine ; toutefois, un nouveau réglage peut s'avérer nécessaire, procéder alors de la façon suivante:

•Vérifier que la boîte de vitesse est au point mort.

REMARQUE : La boîte de vitesse est au point mort lorsque les roues arrières du tracteur peuvent être manoeuvrées librement.

•Desserrer la vis de réglage (3) située à l'avant de la roue arrière droite.

•Positionner le levier de changement de vitesse dans l'encoche de position neutre (N).

•Resserrer à fond la vis de réglage (3).

REMARQUE : Mettre le carter de coupe en position basse afin de dégager un peu plus d'espace pour effectuer ce réglage.

64

Page 63 Page 65
Page 64
Image 64
Husqvarna LT126 Transaxle Gear Shift Lever Neutral Adjustment, Einstellung DES Schalthebels DES Differentialgetriebes
Page 63 Page 65

LT126 specifications

The Husqvarna LT126 is a standout model within the compact lawn tractor market, known for its robust construction, user-friendly design, and versatile features. It is primarily designed for homeowners looking for an efficient and reliable solution for maintaining their lawns. Built with a focus on comfort and ease of use, the LT126 boasts a number of characteristics that enhance both performance and user experience.

One of the key features of the LT126 is its powerful engine. Equipped with a reliable 547cc Briggs & Stratton engine, this tractor ensures efficient performance while providing ample power for routine mowing tasks. The engine is designed with easy starting features and efficient fuel consumption, making it an ideal choice for any yard size.

The LT126 features a 42-inch cutting deck, which enables quick and efficient mowing. This cutting deck is designed with specified cutting heights, allowing users to adjust it according to their lawn's needs. With a simple lever mechanism, users can easily customize their mowing height for a clean, even cut.

Maneuverability is another highlight of the Husqvarna LT126. The tractor is equipped with a tight turning radius, which facilitates easy navigation around obstacles like flower beds and trees. Additionally, the hydrostatic transmission allows for smooth speed adjustments, enabling users to maintain controlled and confident operation even in tight spaces.

Comfort is paramount in the Husqvarna LT126 design. The high back seat provides good back support, allowing users to tackle mowing tasks for extended periods without discomfort. The ergonomically designed steering wheel and pedals ensure that operators can easily maintain control, making the tractor accessible to a wide range of users.

Furthermore, the Husqvarna LT126 integrates advanced technologies, such as the easy-to-use dashboard that provides real-time information about fuel levels, cutting height, and service reminders. This feature ensures that users are constantly informed about their tractor’s performance, contributing to overall maintenance and efficiency.

The model also supports optional attachments, such as mulching kits, baggers, and snow blades, making it a versatile tool for year-round yard care. This adaptability allows homeowners to maximize their investment by utilizing the tractor beyond traditional mowing.

In summary, the Husqvarna LT126 is a powerful and versatile lawn tractor that combines efficiency, comfort, and advanced technology. With its emphasis on user-friendly features and adaptability, it stands out as an essential tool for maintaining a beautiful lawn, making it an excellent choice for both novice and experienced lawn care enthusiasts.
Top Page Image Contents