Premier Mounts installation instructions Electrical Box Installation, PP-FCMA-QLAdjustments

PP-FCMA-QL

Electrical Box Installation

Electrical installation should be done in accordance to local codes and regulations.

Step 1. Cut the tile where the electrical base box is going to be secured.

Step 2. Using (commercially available) hardware depending on electrical installation environment, install the electrical box and secure it to the plate.

Step 3. Make all electrical connections at this time.

Electrical Box

Electrical Box

Cut-out

PP-FCMA-QL Adjustments

Step 1. Loosen the M8 x 20mm screws and M8 flat washers. This will allow you to slide the base box laterally.

Please refer to the purchased base box for further operating instructions.

Ceiling Tile

PP-FCMA-QL

M8 Flat

Washer

M8 x 20mm

Phillips Head

Screw

Page 10 Installation Instructions