Premier Mounts PP-FCMA-QLInstallation, 24”x24” Ceiling Tile, 24”x48” Ceiling Tile

PP-FCMA-QL

Eye Lag Screw

Permanent Mounting

Structure

Eye Lag Screw

Braided Cable

T-bar Frame

Ceiling Tile

Step 1. Attach the braided cable, using the directions on page 5, in the appropriate manner for your mounting configuration. Step 2. Let the four (4) strands of braided cable hang down off to one side of the opening in the ceiling.

PP-FCMA-QL Installation

24”x24” Ceiling Tile

24” ‘T’ Bar (Commercially Available)

Mounting Studs on the Bottom

Dual Knock Outs

Ceiling

24”x48” Ceiling Tile

The dual knock out plates for the electrical box must be removed prior to installation.

Step 1. Install the PP-FCMA-QL plate securely onto the T-bar framework with the mounting studs face down (according to your installation configuration).

In the event that you are using the PP-FCMA-QL in an opening that is 24” x 48”, a 24” piece of T-bar (commercially avail- able) must be used to support the mount and ceiling tile. The T-bar (commercially available) will run from side to side and help support the PP-FCMA-QL and 24” x 24” replacement ceiling tile (commercially available).

Page 6 Installation Instructions