Setting Up Your Food Processor

Installing the Adjustable Slicing Disc

IMPORTANT: The adjustable slicing disc can only be installed in one direction.

1.With the work bowl installed, place the drive adapter on the power shaft of the base.

2.Holding the adjustable slicing disc by the 2 finger grips, align the pins onto the adjustable slicing disc adapter into the L-slots on the disc. Slide the disc down onto the adapter and turn to engage the pins in the L-slot.

3.Lower the slicing blade and slicing adapter onto the drive adapter.

TIP: You may need to turn the disc/drive adapter until it drops down into place.

4. Install the work bowl cover, being sure it

 

locks into place.

English

 

Adjusting the Slicing

Thickness

Set the desired slicing thickness by moving the lever to the left for thinner slices or to the right for thicker slices.

Thinner

Thicker

NOTE: The lever only works with the adjustable slicing disc. Changing thickness settings with other discs or blades installed will have no effect on operation.

13

Page 11
Image 11
KitchenAid 5KFP1335 manual Installing the Adjustable Slicing Disc, Adjusting the Slicing Thickness