SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 25)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Install new belt in reverse order of removal.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower in reverse order of removal instructions.

MANDRELIDLER

PULLEYPULLEYS

MANDREL

PULLEY

FIG. 25

TO ADJUST BRAKE (See Fig. 26)

Your tractor is equipped with an adjustable brake system

WITH PARKING BRAKE “ENGAGED”

1-1/2"

NUT “A”

JAM NUT

OPERATING ARM

FIG. 26

TO REPLACE MOTION DRIVE BELT (See Fig. 27)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

Remove mower (See “TO REMOVE MOWER” in this section of this manual).

Remove upper belt keeper.

Remove belt from stationary idler and clutching idler.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Pull belt toward front of tractor and remove downwards from around engine pulley.

Install new belt by reversing above procedure.

IMPORTANT: MAKE SURE UPPER BELT KEEPER IS POSITIONED PROPERLY BETWEEN LOCATOR TABS.

which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

ENGINE

PULLEY

CLUTCHING IDLER

STATIONARY IDLER

TRANSAXLE PULLEY

LOCATOR

TABS

UPPER BELT

KEEPER

FIG. 27

20

Page 20
Image 20
Husqvarna LT130 To Replace Mower Blade Drive Belt See Fig, To Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

LT130 specifications

The Husqvarna LT130 is a ride-on lawn mower designed for homeowners seeking efficiency, comfort, and precision in their lawn care tasks. This model strikes a balance between performance and ease of use, making it an ideal choice for those with medium to large-sized yards.

At the heart of the LT130 is its powerful engine, which provides robust performance for tackling various terrains and grass types. The mower is equipped with a reliable Briggs & Stratton engine that offers ample power while ensuring fuel efficiency. This feature is vital for homeowners who wish to maintain their lawns without incurring excessive operational costs.

One of the prominent features of the LT130 is its cutting deck, which measures 97 cm (approximately 38 inches) in width. This size allows for quick mowing sessions, reducing the time spent on lawn care while providing a clean and even cut. The adjustable cutting heights, ranging from 30 mm to 75 mm, give users the flexibility to customize the mower's performance according to their lawn conditions and preferences.

The LT130 incorporates Husqvarna's innovative Reverse Motion technology, which enables users to mow in reverse without having to disengage the cutting blades. This is particularly useful for navigating tight spaces, around flower beds, and obstacles, facilitating a more efficient mowing experience.

Comfort is a focal point in the design of the LT130. The ergonomically designed seating and controls ensure that users can operate the mower with minimal fatigue. The easily accessible controls are intuitive and designed for user-friendliness, making it suitable for inexperienced operators. Additionally, the integrated cup holder and storage compartment enhance the overall convenience of the mower.

The Husqvarna LT130 also features a durable build that can withstand the rigors of regular lawn maintenance. The rugged chassis and high-quality materials provide longevity and reliability, ensuring that the mower serves homeowners well for years to come.

For added versatility, the LT130 is compatible with various attachments, such as baggers and mulch kits, allowing users to manage grass clippings in different ways. This adaptability makes it a multi-functional tool for landscape management.

In summary, the Husqvarna LT130 is a robust ride-on lawn mower that combines power, efficiency, and comfort. With its strong engine, adjustable cutting deck, and user-friendly features, it caters to the needs of homeowners looking to maintain a healthy and attractive lawn. Its durability and adaptability further solidify its reputation as a wise investment for lawn care enthusiasts.