MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 10)

Raise mower to highest position to allow access to blades.

Remove blade bolt, lock washer and flat washer se- curing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble blade bolt, lock washer and flat washer in exact order as shown.

Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

EDGE UP

ASSEMBLY

BLADE

 

 

CENTER

 

HOLE

LOCK WASHER

 

 

STAR

FLAT WASHER

BLADE BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE

IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 10

TO SHARPEN BLADE (See Fig. 11)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 11

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not

16necessary.

Page 16
Image 16
Husqvarna LTH1742 owner manual Tractor

LTH1742 specifications

The Husqvarna LTH1742 is a standout in the realm of riding lawn mowers, designed to deliver both performance and comfort for homeowners managing medium to large lawns. With its robust build and user-friendly features, it ensures a seamless mowing experience that meets the demands of any yard.

One of the key features of the LTH1742 is its powerful engine. Equipped with a 17-horsepower Briggs and Stratton engine, this mower provides ample power to handle tough grass and uneven terrain. The reliable four-stroke engine ensures efficient fuel consumption while producing the necessary torque for effective cutting even in challenging conditions.

The 42-inch cutting deck is another significant characteristic of the Husqvarna LTH1742. Its size strikes a balance between maneuverability and mowing efficiency, allowing users to cover a wider area in less time. The deck features a robust steel construction for durability, and the cutting height can be easily adjusted from 1 to 4 inches using a convenient lever, catering to various grass types and user preferences.

To enhance the mowing experience, the LTH1742 incorporates hydrostatic transmission. This technology provides the operator with smooth and precise control over speed and direction, allowing for effortless navigation around obstacles and tight corners. The automatic drive system eliminates the need for gear shifting, making it accessible for users of all experience levels.

Comfort is also a focal point of the Husqvarna LTH1742. It comes equipped with an ergonomic seat that offers ample support, ensuring that users can mow for extended periods without discomfort. The easy-to-reach controls and intuitive dashboard further enhance user experience, allowing for quick adjustments without needing to divert attention from the mowing process.

Another notable feature includes the ease of maintenance. The mower is designed with a washout port that makes cleaning the cutting deck a straightforward task, prolonging the equipment's lifespan and maintaining optimal performance. Additionally, the LTH1742 offers a variety of accessories, enabling users to customize their mower for different tasks, such as mulching or bagging.

In summary, the Husqvarna LTH1742 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns with ease. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and attention to operator comfort solidify its place as a reliable and effective lawn care solution.