ASSEMBLY

INSTALL MULCHER PLATE (See Fig. 4) (If previously removed)

Raise and hold deflector shield in upright position.

Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

Hook front latch into hole on front of mower deck.

Hook rear latch into hole on back of mower deck.

CAUTION:Do not remove deflector shield from mower.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulcher blades are designed for discharging and bagging also.

DEFLECTOR

MULCHER

SHIELD

PLATE

LATCH

HOOKS

FIG. 4

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See“TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFOREYOU OPERATE AND ENJOYYOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROMTHIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

All assembly instructions have been completed.

No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

Seat is adjusted comfortably and tightened securely.

All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

Check wiring. See that all connections are still secure and wires are properly clamped.

Before driving tractor, be sure freewheel control is in drive position.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded gasoline.

Become familiar with all controls - their location and function. Operate them before you start the engine.

Be sure brake system is in safe operating condition.

It is important to purge the transmission before oper- ating your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

8

Page 8
Image 8
Husqvarna LTH1742 To Convert to Bagging or Discharging, Check Tire Pressure, Check Deck Levelness, Check Brake System

LTH1742 specifications

The Husqvarna LTH1742 is a standout in the realm of riding lawn mowers, designed to deliver both performance and comfort for homeowners managing medium to large lawns. With its robust build and user-friendly features, it ensures a seamless mowing experience that meets the demands of any yard.

One of the key features of the LTH1742 is its powerful engine. Equipped with a 17-horsepower Briggs and Stratton engine, this mower provides ample power to handle tough grass and uneven terrain. The reliable four-stroke engine ensures efficient fuel consumption while producing the necessary torque for effective cutting even in challenging conditions.

The 42-inch cutting deck is another significant characteristic of the Husqvarna LTH1742. Its size strikes a balance between maneuverability and mowing efficiency, allowing users to cover a wider area in less time. The deck features a robust steel construction for durability, and the cutting height can be easily adjusted from 1 to 4 inches using a convenient lever, catering to various grass types and user preferences.

To enhance the mowing experience, the LTH1742 incorporates hydrostatic transmission. This technology provides the operator with smooth and precise control over speed and direction, allowing for effortless navigation around obstacles and tight corners. The automatic drive system eliminates the need for gear shifting, making it accessible for users of all experience levels.

Comfort is also a focal point of the Husqvarna LTH1742. It comes equipped with an ergonomic seat that offers ample support, ensuring that users can mow for extended periods without discomfort. The easy-to-reach controls and intuitive dashboard further enhance user experience, allowing for quick adjustments without needing to divert attention from the mowing process.

Another notable feature includes the ease of maintenance. The mower is designed with a washout port that makes cleaning the cutting deck a straightforward task, prolonging the equipment's lifespan and maintaining optimal performance. Additionally, the LTH1742 offers a variety of accessories, enabling users to customize their mower for different tasks, such as mulching or bagging.

In summary, the Husqvarna LTH1742 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners looking to maintain their lawns with ease. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and attention to operator comfort solidify its place as a reliable and effective lawn care solution.