maintenance
Blades
In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.
WARNING!
Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.
Check the blades
Bent or cracked blades or blades with large nicks should be replaced.
Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ ground or must be replaced.
Balance the blades after sharpening. Check the blade mounts.
IMPORTANT INFORMATION
The sharpening of blades should be carried out by an authorized service workshop.
Blade replacement
•Remove blade bolt by turning counterclockwise.
•Install new or
•Install and tighten blade bolt securely.
•Torque blade bolt to 90 ft/lbs (122 Nm).
IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required.
Do not use a lower grade hardware than specified.
2
1 
3
4
1.Blade
2.Cutter housing
3.Lock washer
4.Blade bolt, special Blade attachment
