![](/images/new-backgrounds/1166994/16699441x1.webp)
CONTROLS
Blade switch
To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully.
Blade Switch
Ignition Switch
The ignition key is placed on the control panel and is used to start and stop the engine.
WARNING!
Do not run the starter for more than five seconds each time. If the engine does not start, wait 10 seconds before retrying.
Fuses
The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.
There are three fuses as well as a socket for one spare fuse.
Fuse ratings and functions:
•20 A, Primary fuse.
•7.5 A, Mower deck coupling.
•7.5 A, Accessory outlet.
•Socket for spare fuse.
Ignition Switch
Fuses |