|
| ASSEMBLY | |
5 | TRIMMING BELT COVER | 6 | INSTALLING BELT COVERS |
(42" and 48" decks only) |
| ||
1.Using the hacksaw, trim the belt cover along the dashed line.
Belt Cover
42/48 Trim Line
Belt Cover Tab
Deck Belt Shield
1.Place the deck belt shield on the deck over the drive pulley and secure with hardware removed from steel belt shield.
2.Place retainer on the outer pulley cover.
3.Align the tab end of the belt cover into the slot on the deck belt shield and the other end over the end of the outer pulley cover.
4.Secure with knob.
Knob
Middle Chute Latch
Retainer
Outer Pulley Cover
10
