Changing the diamonds

Changing the diamonds

As different applications require different selections of diamond tools, there will be many occasions when the grinding discs need to be changed.

Following is a guide for this procedure.

Preparation

1.Ensure STOP/RUN switch is in STOP position and the power-plug disconnected as unintentional start- ing of machine while changing discs can result in serious injury.

2.Have a set of gloves ready, as diamonds can get very hot during dry grinding applications.

Changing

1.Set handle in upright position (illustrated right).

2.Pull back on handle to lift grinding head off the ground.

4.Lay machine back on the ground.

5.Put on gloves.

6.Remove grinding disc by slightly rotating disc and then pull off (direction that the discs will need to be rotated will depend on the direction the machine was last running).

7.Check to ensure all head locks/shear pins are tight.

8.Once new diamonds have been attached, reverse procedure to lower machine to ground.

9.As new diamonds may be a different height to set being previously used, re-adjust skirt to ensure good seal is established with the floor.

English - 11

Page 9 Page 11
Page 10
Image 10
Husqvarna PG530 manuel dutilisation Changing the diamonds, Preparation
Page 9 Page 11

PG530 specifications

The Husqvarna PG530 is a powerful and versatile floor grinding machine designed for professional contractors and heavy-duty applications. This equipment is ideal for preparing and finishing various types of surfaces, including concrete, terrazzo, and natural stone. Built with advanced technologies and rugged construction, the PG530 stands out in the market for its reliability and performance.

One of the key features of the Husqvarna PG530 is its unique three-disc design, which provides efficient grinding performance. The three grinding heads allow for better distribution of weight and improved balance, ensuring an even grind across the floor. With a wide grinding width of 21 inches, the PG530 can cover large surface areas quickly, making it an efficient choice for both small projects and larger commercial jobs.

The machine is powered by a robust 15 HP motor, delivering ample power to tackle tough grinding tasks. It also features adjustable grinding pressure, allowing users to optimize the pressure according to the specific requirements of the job. This adaptability makes the PG530 suitable for a wide range of applications, from light surface preparation to heavy-duty grinding and polishing.

Additionally, the PG530 is equipped with Husqvarna's patented Dual Drive Technology. This innovative system provides independent speed control for both the grinding heads and the machine's forward movement. This capability allows operators to adjust the speed of the grinding discs while controlling the speed of the machine itself, resulting in enhanced flexibility and control during operation.

The machine is designed with user comfort in mind. Its ergonomic handle and adjustable working height make it easy to operate for extended periods without causing fatigue. The PG530 is also fitted with an integrated dust collection system, helping to maintain a clean working environment by minimizing dust and debris. This feature is essential for safety and compliance with health regulations.

In terms of usability, the PG530 is easy to transport and set up, making it a practical choice for contractors on the go. Its compact footprint ensures that it can maneuver in tight spaces, while the folding handle allows for easy storage.

Overall, the Husqvarna PG530 combines powerful performance, innovative technology, and user-friendly design to meet the demands of flooring professionals. Whether for surface preparation, grinding, or polishing, the PG530 is a reliable tool that enhances productivity and delivers superior results.
Top Page Image Contents