SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 20)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK

LEVER

HANDLE

(LOW POSITION)

Fig. 20

ENGINE

Maintenance, repair, or replacement of the emission control devices and systems, which are being done at the custom- ers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

IMPORTANT: NEVER TAMPER WITH THE ENGINE GOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER/ DEPARTMENT, WHICH HAS THE PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated, overinflation can cause an explosion.

•Maintain 20 pounds of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 21)

•Place blocks under transmission to keep tiller from tipping.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

CLEVIS PIN

HAIRPIN CLIP

Fig. 21

TO REMOVE BELT GUARD (See Fig. 22)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove two (2) screws from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

AND WASHER

 

HEX NUT AND WASH- ER (LOCATED BEHIND TIRE)

SCREW

HAIRPIN CLIP AND

AND

WASHER

CLEVIS PIN

Fig. 22

15

Page 14 Page 16
Page 15
Image 15
Husqvarna RTT900 owner manual Service and Adjustments, Tiller, Tire Care
Page 14 Page 16

RTT900 specifications

The Husqvarna RTT900 is a cutting-edge robotic mower designed to provide a seamless and efficient lawn care experience. With its innovative engineering and advanced features, the RTT900 is engineered to handle large and complex lawns, making it an ideal choice for residential properties and professional landscapers alike.

One of the standout features of the RTT900 is its advanced navigation system. Equipped with GPS and AI technology, the mower can map out your yard, allowing it to navigate through obstacles and reach every corner of your lawn. This intelligent mapping ensures that no areas are missed, providing a consistently manicured look to your yard.

The RTT900 is powered by a robust lithium-ion battery that delivers extended runtime and quick charging capabilities. With the ability to operate for hours on a single charge, the mower can handle lawns of up to 2,200 square meters, making it incredibly efficient for larger spaces. The smart battery management system optimizes energy usage, ensuring that the mower runs economically while maintaining performance.

Another notable aspect of the RTT900 is its customizable cutting height and mowing patterns. Users can easily adjust the cutting height to suit their lawn's specific needs, whether it's a low trim for a golf course look or a higher cut for a more natural appearance. The mower's ability to vary its mowing patterns further enhances its effectiveness, creating a healthier lawn by promoting even grass growth and preventing wear on certain areas.

Additionally, the Husqvarna RTT900 incorporates advanced weather resistance, allowing it to operate in various weather conditions. Its durable construction ensures that it can withstand rain, dew, and other environmental factors, keeping your lawn looking pristine regardless of the elements.

Integration with smart technology adds to the RTT900's appeal. The mower can be controlled via a smartphone app that allows users to schedule mowing sessions, monitor battery levels, and receive alerts about any issues. This user-friendly interface ensures that managing your lawn care is as convenient as possible.

In summary, the Husqvarna RTT900 marries technology with practicality to offer an innovative lawn care solution. Its advanced navigation system, long-lasting battery, customizable features, and smart technology make it an excellent investment for anyone looking to simplify their lawn maintenance. Whether you’re a busy homeowner or a professional landscaper, the RTT900 delivers unparalleled efficiency and results for your lawn care needs.
Top Page Image Contents