Husqvarna TS200FR owner manual Training, Preparation, Operation, Maintenance and Storage

SAFETY RULES

Safe Operation Practices for Tiller Attachments.

TRAINING

•Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

•Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

•Keep the area of operation clear of all persons, partic- ularly small children, and pets.

PREPARATION

•Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

•Disengage all clutches and shift into neutral before starting the engine (motor).

•Do not operate the equipment without wearing adequate outer garments. Wear footwear that will improve footing on slippery surfaces.

•Handle fuel with care; it is highly flammable.

•Use an approved fuel container.

•Never add fuel to a running engine or hot engine.

•Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

•Replace gasoline cap securely and clean up spilled fuel before restarting.

•Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

•Do not put hands or feet near or under rotating parts.

•Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

•After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

•Exercise caution to avoid slipping or falling.

•If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

•Stop the engine (motor) when leaving the operating position, before unclogging the tines, and when making any repair, adjustments, and inspections.

•Take all possible precautions when leaving the machine unattended. Disengage the power take-off, lower the attachment, shift into neutral, stop the engine, and remove the key.

•Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.

•Do not run the engine indoors; exhaust fumes are dan- gerous.

•Never operate the tiller without proper guards, plates, or other safety protective devices in place.

•Keep children and pets away.

•Do not overload the machine capacity by attempting to till too deep at too fast a rate.

•Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

•Lift tiller out of the ground when turning corners.

•Do not put tractor in reverse gear while tiller is in the ground.

•Never allow bystanders near the unit.

•Use only attachments and accessories approved by the manufacturer of the tiller (such as wheel weights, counterweights, cabs, etc.

•Never operate the tiller without good visibility or light.

MAINTENANCE AND STORAGE

•Keep machine, attachments, and accessories in safe working condition.

•Check shear bolts, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

•Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, etc. Allow the engine to cool before storing in any enclosure.

•Always refer to the operator’s guide instructions for im- portant details if the tiller is to be stored for an extended period.

-IMPORTANT -

Cautions, Importants, and Notes are a means of attracting attention to important or critical information in this manual.

Caution: Look for this symbol to point out important safety precautions. It means

--Attention! Become Alert! Your safety is involved.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

2