TROUBLESHOOTING POINTS

PROBLEM

CAUSE

 

CORRECTION

 

 

 

 

 

Will not start

1.

Out of fuel.

1.

Fill fuel tank.

 

2.

Engine not “CHOKED” properly.

2.

See “TO START ENGINE” in Operation section.

 

3.

Engine flooded.

3.

Wait several minutes before attempting to start.

 

4.

Dirty air cleaner.

4.

Replace air cleaner cartridge.

 

5.

Water in fuel.

5.

Drain fuel tank and carburetor, and refill tank with

 

 

 

 

fresh gasoline.

 

6.

Clogged fuel tank.

6.

Remove fuel tank and clean.

 

7.

Loose spark plug wire.

7.

Make sure spark plug wire is seated properly on plug.

 

8.

Bad spark plug or improper gap.

8.

Replace spark plug or adjust gap.

 

9.

Carburetor out of adjustment.

9.

Make necessary adjustments.

 

 

 

 

 

Hard to start

1.

Throttle control not set properly.

1.

Place throttle control in “FAST” position.

 

2.

Dirty air cleaner.

2.

Replace air cleaner cartridge.

 

3.

Bad spark plug or improper gap.

3.

Replace spark plug or adjust gap.

 

4.

Stale or dirty fuel.

4.

Drain fuel tank and refill with fresh gasoline.

 

5.

Loose spark plug wire.

5.

Make sure spark plug wire is seated properly on plug.

 

6.

Carburetor out of adjustment.

6.

Make necessary adjustments.

 

 

 

 

 

Loss of power

1.

Engine is overloaded.

1.

Set depth stake for shallower tilling.

 

2.

Dirty air cleaner.

2.

Replace air cleaner cartridge.

 

3.

Low oil level/dirty oil.

3.

Check oil level/change oil.

 

4.

Faulty spark plug.

4.

Clean and regap or change spark plug.

 

5.

Oil in fuel.

5.

Drain and clean fuel tank and refill, and clean carburetor.

 

6.

Stale or dirty fuel.

6.

Drain fuel tank and refill with fresh gasoline.

 

7.

Water in fuel.

7.

Drain fuel tank and carburetor, and refill tank with fresh

 

 

 

 

gasoline.

 

8.

Clogged fuel tank.

8.

Remove fuel tank and clean.

 

9.

Spark plug wire loose.

9.

Connect and tighten spark plug wire.

 

10.

Dirty engine air screen.

10.

Clean engine air screen.

 

11.

Dirty/clogged muffler.

11.

Clean/replace muffler.

 

12.

Carburetor out of adjustment.

12.

Make necessary adjustments.

 

13.

Poor compression.

13.

Contact an authorized service facility.

 

 

 

 

 

Engine overheats

1.

Low oil level/dirty oil.

1.

Check oil level/change oil.

 

2.

Dirty engine air screen.

2.

Clean engine air screen.

 

3.

Dirty engine.

3.

Clean cylinder fins, air screen, and muffler area.

 

4.

Partially plugged muffler.

4.

Remove and clean muffler.

 

5.

Improper carburetor adjustment.

5.

Adjust carburetor to richer position.

 

 

 

 

 

Excessive bounce/

1.

Ground too dry and hard.

1.

Moisten ground or wait for more favorable soil

difficult handling

 

 

 

conditions.

 

 

 

 

 

Soil balls up or clumps

1.

Ground too wet.

1.

Wait for more favorable soil conditions.

 

 

 

 

 

Engine runs but tiller

1.

Tine clutch control is not engaged.

1.

Engage tine clutch control.

tines won’t move

2.

V-belt not correctly adjusted.

2.

Inspect/adjust V-belt.

 

3.

V-belt is off pulley(s).

3.

Inspect V-belt.

 

 

 

 

 

Engine runs but labors

1.

Tilling too deep.

1.

Set gauge wheels for shallower tilling.

 

2.

Carburetor out of adjustment.

2.

Make necessary adjustments.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Page 12 Page 14
Page 13
Image 13
Husqvarna TS200FR owner manual Troubleshooting Points
Page 12 Page 14

TS200FR specifications

The Husqvarna TS200FR is a high-performance, versatile machine designed for professional use in demanding environments. Known for its robustness and reliability, the TS200FR is a powerful tool that excels in various applications, including landscaping, grounds maintenance, and outdoor construction tasks. This track-driven, stand-on model provides exceptional stability and maneuverability, making it an ideal choice for operators seeking efficiency and comfort.

One of the standout features of the Husqvarna TS200FR is its powerful engine, which delivers impressive performance and torque. This engine enables the machine to tackle tough terrains and challenging tasks with ease. The reliable powertrain is designed to ensure consistent performance, allowing operators to maintain high productivity levels throughout their workday.

The TS200FR is equipped with advanced technologies that enhance its overall functionality. The patented All-Wheel-Drive system ensures optimal power distribution to all four wheels, providing superior traction on slippery or uneven surfaces. This feature is particularly beneficial when navigating steep inclines or wet conditions, minimizing the risk of slippage or loss of control.

Another key characteristic of the TS200FR is its user-friendly design. The intuitive controls are designed for ease of use, allowing operators to focus on their tasks without unnecessary distractions. The adjustable operator platform provides comfort during prolonged use, enabling users to operate the machine effectively without fatigue.

The machine also boasts a compact footprint, making it easy to maneuver in tight spaces. This is particularly advantageous for landscaping projects or urban environments where space can be limited. The durable construction of the TS200FR ensures that it can withstand the rigors of daily use, providing peace of mind for operators and businesses alike.

Maintenance is straightforward, thanks to the easily accessible components and clear service points. This design consideration minimizes downtime and enhances overall efficiency, allowing users to spend more time on the job rather than in the maintenance shop.

In summary, the Husqvarna TS200FR stands out as a powerful, reliable, and user-friendly machine suitable for a variety of demanding applications. Its robust engine, advanced traction technologies, and compact design make it an essential tool for professionals in landscaping and outdoor construction, ensuring high levels of productivity and operator satisfaction.
Top Page Image Contents