Phonecell SX4D Troubleshooting

Cellular Telephone Service is Not Working

If the cellular telephone service is not working, contact your cellular provider.

Unable to Receive Incoming Calls

Verify that the Phonecell SX4D is “on-hook” (hung up).

Moisture or Ventilation Problems

Visually inspect your Phonecell SX4D’s enclosure. Moisture can damage the equipment. Ventilation is also very important. If there are moisture or ventilation problems, move your Phonecell SX4D to correct as necessary, see the Temperature Environment section of this manual.

No Power

To properly operate, the Phonecell SX4D must either be connected to AC power or have the required batteries loaded in the battery compartment. Upon loss of power to the Phonecell SX4D, verify proper connection to AC. If AC power is unavailable, verify that the batteries are in good condition and that the battery switch is in the battery power active position.

Battery Backup Failure

The Phonecell SX4D can accommodate 6 standard AAA alkaline batteries for operation when AC power is not available. A switch is used to select either AC or internal battery operation. When the internal battery operation is selected, the Phonecell SX4D will operate for approximately 10 minutes of talk time with fresh batteries. Replace the batteries if necessary.

NOTE: The Phonecell SX4D does not support rechargeable batteries

WARNING!

Only Authorized Service Personnel should remove the cover of your ! Phonecell SX4D. For further assistance, contact your Authorized Telular Representative. Please have the model and serial number ready (model and

serial numbers are located on the label on the bottom of the unit).

SX4D GSM 900 • SX4D GSM 1800

29

USER MANUAL

Page 30
Image 30
Telular user manual Phonecell SX4D Troubleshooting