Telular SX4D Variable Dial Time Auto Send Delay Option, Mobile Equipment Personalization MEP

Phonecell Operation - continued

Variable Dial Time (Auto SEND Delay) Option

When you place a call, your Phonecell SX4D automatically sends the phone number over the cellular network after you dial the last digit. However, to make sure you have enough time to dial the last digit, a 3-second Auto SEND Delay is programmed into the unit at the factory. To change the Auto SEND Delay setting, see the User Programming Commands section of this manual.

Zero Dial Delay for Frequently Called Numbers

A new patented feature enables the Phonecell SX4D to recognize your frequently called phone numbers and send them immediately – without the 3-second Auto SEND Delay. The Phonecell SX4D stores a list of up to 50 different numbers in its memory. This list contains the last 50 numbers that have been called at least twice successfully.

NOTE: Cycling (turning OFF/ON) the power will erase the current list. A new list will be started when power is re-applied. To enable or disable this feature, see the User Programming Commands section of this manual.

Mobile Equipment Personalization (MEP)

The terminal will support all five lock type features of GSM 02.22. Personalization features check information stored in the terminal which limits the SIMs with which the terminal will operate. Factory default is all lock types set to be deactivated. Please contact Telular Corporation if you need more information on this feature.

Three-Digit Dialing

In many countries, three-digit dialing is needed to access emergency services, infor- mation services, and voicemail. The Phonecell SX4D accepts three-digit dialing.

Using Standard Supplementary Services

Your Phonecell SX4D is compatible with a variety of special services, including:

•Call Forwarding

•Call Barring

•Call Waiting

•Three-Way Calling

•Caller ID

•Voice Mail

and more...

Depending upon your cellular provider, these services may be available on a subscription basis. However, certain dialing sequences must be entered. Please consult your service provider for the dialing instructions for your system.

Standard supplementary services are defined as those supplementary services handled while not in a call. Depending on the supplementary service, several commands may be available. The command list is defined below:

SX4D GSM 900 • SX4D GSM 1800 24 USER MANUAL