Husqvarna TS 250 XL manual Contents

EVERY MACHINE IS THOROUGHLY TESTED BEFORE LEAVING THE FACTORY. EACH MACHINE IS SUPPLIED WITH A COPY OF THIS MANUAL. OPERATORS OF THIS EQUIPMENT MUST READ AND BE FAMILIAR WITH THE SAFETY WARNINGS. FAILURE TO OBEY WARNINGS MAY RESULT IN INJURY OR DEATH. FOLLOW INSTRUC- TIONS STRICTLY TO ENSURE LONG SERVICE IN NORMAL OPERATION.

CONTENTS
Symbol Definitions		3 - 5
Hearing Hazard Warning		5
Dust Warning		6
Decal Descriptions and Locations		6 - 7
Safety Warnings - DOs & DO NOTs		8 - 9
Figures:
Figure 1		10
Figure 2		10
Figure 3		14
Figure 4		16
Instructions:
1.	Features	11
2.	Benefits	11
3.	Machine Set-Up	11 - 13
4.	Operating Procedure	13
5.	Adjustable Lockbar With Depth Linking Protection	14
6.	Manual Thermal Overload	14
7.	Recommended Extension Cords	14
8.	Alignment Procedures	14 - 15
9.	Profile Wheel Set-Up and Use	15
10.	Plunge Cutting	15
11.	Maintenance Procedures	15
12.	Water Pump, Trouble Shooting Procedure	16
13.	Repairs & V-Belt Tensioning with Cam Adjustment	16
14.	Spare Parts	16
15.	Tile Cutting Accessories	17
Wiring Diagrams		18 - 19
Warranty		21

NOTE:

Part Numbers that have an ASTERISK (*) suffix may not be active 9-digit numbers. The ‘542’ prefix have been added to current 6-digit part numbers and ‘0’ to 8‑digit part numbers.