Husqvarna W21K, W21SK, W21SBK, W53SBEK, W53SEK, W21KC, W21SKC, W21SBKC manual Cutting height

CONTROLS

Cutting height

The cutting deck height is obtained by raising the wheels for low cut and lowering wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns.

To change your cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9- position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

Ground Drive Bail

The ground drive bail for models so equipped, is used to engage the drive wheels.

The ground drive bail is engaged by pressing the bail forward to engage the drive wheels. Release the ground drive bail to stop rear wheels from driving.

	2
	1
	3
8019-038	8019-039

1.Lever backward to lower mower Lever forward to raise mower

2.Lever

3.Plate Tab

8019-045

Ground drive bail, Models: W21SBK, W53SBEK, W21SBKC

8019-029

Ground drive bail, Models: W21SK, W53SEK, W21SKC

No ground drive bail, Model: W21K, W21KC 8019-046

English-17