Husqvarna W21K, W21SK, W21SBK, W53SBEK, W53SEK, W21KC, W21SKC, W21SBKC Replacing the Fuel Filter

Models: W21K, W21SK, W21SBK, W53SBEK, W53SEK, W21KC, W21SKC, W21SBKC

1 50
Download 50 pages 11.48 Kb
Page 38
Image 38
Replacing the Fuel Filter

MAINTENANCE

Replacing the Fuel Filter

Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged.

Replace the filter as follows:

1. Move the hose clamps away from the filter. Use flat-nosed pliers.

2.Pull the filter loose from the hose ends.

3.Push the new filter into the hose ends. Position the filter with the “FLOW” arrow

8011-729

pointing up toward the fuel pump. If

Fuel filter

necessary, a soap solution can be

 

applied to the filter ends to ease

 

mounting.

 

4.Move the hose clamps back toward the filter.

Checking Tires

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

Drive Wheels

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the rear drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, locknuts and washer.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/or drive wheel gear teeth.

4.Put wheels back in place

NOTE: If after cleaning, the drive wheels do not turn freely, contact a qualified service

English-35

Page 38
Image 38
Husqvarna W21K, W21SK, W21SBK, W53SBEK, W53SEK, W21KC, W21SKC, W21SBKC manual Replacing the Fuel Filter, Checking Tires