![](/images/new-backgrounds/1100716/10071657x1.webp)
OPERATION
IMPORTANT INFORMATION
Do not run the starter for more than
5 seconds each time. If the engine does not start, wait about 10 seconds before
6.Start the engine. When the engine starts, immediately release the ignition key back to the run position and adjust the throttle to approximately 1/2 position.
WARNING!
Be sure all persons are clear of area before engaging the blades.
IMPORTANT INFORMATION
To prolong spindle bearing and belt life engage and disengage blades at approximately ½ throttle.
7.Holding down at least one of the operator presence levers, engage blades and set
RPM to maximum
8.Set the ground speed lever to the desired position.
9.Release the neutral lock bail.
Return to run position
Presence lever
Ground speed lever