Husqvarna WH4817EFQ2, WH5219EFQ manual Adjustment of cutting height, Wheel Motor Adjustment

OPERATION

Adjustment of cutting height

Floating deck machines

1.Stop the mower and disengage the blades.

2.Raise the deck height lever to the transport position.

3.Remove the height adjustment pin and place it in the desired cutting height hole. Move deck height lever down onto the pin and mow.

IMPORTANT INFORMATION

Anti-scalp rollers must be in the proper position for maximum deck floatation. See the decal on the front deck.

8011-401

1.Deck height lever

2.Transport position latch

3.Height adjustment pin

Deck height lever

Wheel Motor Adjustment

It is possible to adjust the height of the wheel motor and the caster wheels, if necessary. Go to your Husqvarna dealer to adjust the height of the wheel motor and the caster wheels.

Moving Machine by Hand

In order for the machine to be moved with the engine turned off, the vent screws on both hydraulic pumps must be opened 1/4-1/2 turn.

WARNING!

Make no adjustments without: - the engine stopped,

-the ignition key removed,

-the parking brake activated.

8011-507

Vent screw on the hydraulic pump

English-34