Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna YTH180 To Replace Mower Blade Drive Belt See Fig, To Adjust Attachment Clutch See Fig

Models: YTH180

1 52
Download 52 pages 14.45 Kb
Page 21
Image 21

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 28)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Install new belt in reverse order of removal.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower in reverse order of removal instructions.

MANDREL

PULLEY

IDLER

PULLEYS

MANDREL PULLEY

FIG. 28

TO ADJUST ATTACHMENT CLUTCH (See Fig. 29)

The electric clutch should provide years of service. The clutch has a built-in brake that stops the pulley within 5 seconds. Eventually, the internal brake will wear which may cause the mower blades to not engage, or, to not stop as required. Adjustments should be made by an authorized service technician.

•Make sure attachment clutch and ignition switches are in “OFF” position.

•Adjust the three nylon locknuts until space between clutch plate and rotor measures .012" at all three slot locations cut in the side of brake plate.

NOTE: After installing a new electric clutch, run tractor at full throttle and engage and disengage electric clutch 10 cycles to wear in clutch plate.

ROTOR

CLUTCH PLATE

 

 

.012"

SLOT (3)

 

NYLON LOCKNUT (3)

BRAKE PLATE

 

FIG. 29

TO ADJUST BRAKE (See Fig. 30)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted.

•Depress clutch/brake pedal and engage parking brake.

•Measure distance between brake operating arm and nut "A" on brake rod.

•If distance is other than 1-3/4", loosen jam nut and turn nut "A" until distance becomes 1-3/4". Retighten jam nut against nut "A".

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center.

WITH PARKING BRAKE "ENGAGED"

1-3/4"

NUT “A”

JAM NUT

OPERATING ARM

DO NOT TOUCH THIS NUT. IF FURTHER

BRAKE ADJUSTMENT IS NECESSARY,

CONTACT YOUR NEAREST AUTHORIZED

SERVICE CENTER/DEPARTMENT.

FIG. 30

21

Page 20 Page 22
Page 21
Image 21
Husqvarna YTH180 To Replace Mower Blade Drive Belt See Fig, To Adjust Attachment Clutch See Fig, To Adjust Brake See Fig
Page 20 Page 22

YTH180 specifications

The Husqvarna YTH180 is a well-regarded lawn tractor designed for residential use, appealing to homeowners seeking efficiency and ease in lawn care. Known for its reliability and solid performance, the YTH180 combines power, comfort, and a user-friendly experience to tackle various yard tasks.

At the heart of the YTH180 is a robust 18 horsepower Kohler engine, which provides ample power for even the most daunting lawn maintenance chores. This engine is designed to deliver consistent performance with minimal maintenance, ensuring that users can focus on mowing rather than troubleshooting engine issues. The automatic transmission enables smooth shifting, allowing users to navigate their properties with ease and precision.

One of the standout features of the Husqvarna YTH180 is its 42-inch cutting deck, which provides an excellent balance between maneuverability and cutting efficiency. The cutting deck has several adjustable heights, allowing operators to customize their mowing experience based on grass conditions and lawn preferences. Additionally, the deck is reinforced for durability, ensuring that it can withstand the rigors of frequent use.

The YTH180 also incorporates advanced technologies that enhance the user experience. Its ergonomic steering wheel and comfortable seat ensure that operators can mow for extended periods without discomfort. The foot-operated deck lift makes it easy to adjust the cutting height on the fly, increasing efficiency and convenience.

Storage and transportation are simplified with a compact design, making it easy to fit the YTH180 in standard garages or storage sheds. The tractor's tight turning radius allows for easier maneuvering around flower beds, trees, and other obstacles in the yard.

For those who want to maintain their yards year-round, optional attachments such as snow plows, mulching kits, and bagging systems can expand the YTH180's functionality, turning it into a versatile tool for various outdoor tasks.

In summary, the Husqvarna YTH180 lawn tractor is an excellent choice for homeowners who prioritize performance, efficiency, and comfort in their lawn care efforts. With a powerful engine, a durable cutting deck, and thoughtful ergonomic features, the YTH180 stands out as a reliable partner in maintaining a beautiful lawn. Its combination of technology and user-friendly design makes it suitable for a wide range of lawn care needs.