To Adjust Mower Cutting Height See Fig | Husqvarna YTH2448T manual

FIG.9

OPERATION

FIG. 7

NOTE: Adjust gauge wheels with tractor on a ﬂat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

FIG. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the ﬁrst cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deﬂector shield (S) in place.

FIG. 10

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

YTH2448T specifications

The Husqvarna YTH2448T is a robust and reliable riding lawn mower designed for homeowners who wish to maintain their lawns efficiently and effortlessly. Combining modern technology with user-friendly design, this mower delivers impressive performance while ensuring comfort during extended use.

One of the standout features of the YTH2448T is its powerful 24 HP Briggs & Stratton Intek engine. This engine provides ample power for tackling various lawn conditions, ensuring that the mower can handle tall grass and rugged terrain without sacrificing performance. The engine also features an automatic choke system, making it easy to start even in cold temperatures.

Equipped with a 48-inch cutting deck, the YTH2448T offers a wide cutting path, allowing users to cover more ground in less time. The deck is made from high-quality materials to ensure durability and is designed with a reinforced cutting edge to prevent wear and tear. Additionally, the deck features an adjustable cutting height, allowing users to choose the optimal height for their lawn.

The mower also incorporates an innovative hydrostatic transmission system that provides seamless acceleration and speed control. This technology eliminates the need for shifting gears, making it easier for users to navigate their lawns with precision. The YTH2448T also boasts a tight turning radius, allowing for maneuverability around obstacles such as trees and flower beds.

Comfort is prioritized in the design of the YTH2448T. The mower features an ergonomic seating position with an adjustable seat to accommodate various user heights. The controls are intuitively placed within easy reach, allowing operators to focus on mowing without distraction. The mower is also equipped with a built-in cup holder, providing convenience for long mowing sessions.

Another impressive characteristic of the Husqvarna YTH2448T is its low vibration design, which enhances comfort and reduces fatigue during use. The mower's construction also includes sound damping technology, resulting in a quieter operation, making it suitable for residential neighborhoods.

In conclusion, the Husqvarna YTH2448T is an exceptional riding lawn mower that combines power, comfort, and efficiency. With its reliable engine, wide cutting deck, advanced transmission, and user-friendly features, it stands out as an ideal choice for homeowners looking to keep their lawns in pristine condition. Whether you are a seasoned lawn care enthusiast or a novice, the YTH2448T promises to make lawn maintenance a breeze.

Husqvarna YTH2448T To Adjust Mower Cutting Height See Fig, To Adjust Gauge Wheels See Fig

Models: YTH2448T