SERVICE AND ADJUSTMENTS

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 26)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

•If adjustment is necessary, see steps in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

 

02966

A

A

FIG. 26

FRONT-TO-BACK ADJUSTMENT (See Figs. 26 and 27) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

02548

BB

FIG. 27

B

A

Tighten adjust nut

Loosen adjust nut

B to raise mower

B to lower mower

02950

Loosen jam nut A first

FIG. 28

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 28)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Disengage belt tension rod (K) from lock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

•Remove screws (P) from mandrel covers (Q) and re- move covers.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

•Install belt around all mandrel pulleys (R) and around idler pulleys (S) as shown.

•Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•Reassemble mandrel covers (Q). Securely tighten all screws.

•Engage belt tension rod (K) on locking bracket (L).

21

Page 20 Page 22
Page 21
Image 21
Husqvarna YTH2448T To Replace Mower Blade Drive Belt See Fig, Mower Drive Belt Removal, Mower Drive Belt Installation
Page 20 Page 22

YTH2448T specifications

The Husqvarna YTH2448T is a robust and reliable riding lawn mower designed for homeowners who wish to maintain their lawns efficiently and effortlessly. Combining modern technology with user-friendly design, this mower delivers impressive performance while ensuring comfort during extended use.

One of the standout features of the YTH2448T is its powerful 24 HP Briggs & Stratton Intek engine. This engine provides ample power for tackling various lawn conditions, ensuring that the mower can handle tall grass and rugged terrain without sacrificing performance. The engine also features an automatic choke system, making it easy to start even in cold temperatures.

Equipped with a 48-inch cutting deck, the YTH2448T offers a wide cutting path, allowing users to cover more ground in less time. The deck is made from high-quality materials to ensure durability and is designed with a reinforced cutting edge to prevent wear and tear. Additionally, the deck features an adjustable cutting height, allowing users to choose the optimal height for their lawn.

The mower also incorporates an innovative hydrostatic transmission system that provides seamless acceleration and speed control. This technology eliminates the need for shifting gears, making it easier for users to navigate their lawns with precision. The YTH2448T also boasts a tight turning radius, allowing for maneuverability around obstacles such as trees and flower beds.

Comfort is prioritized in the design of the YTH2448T. The mower features an ergonomic seating position with an adjustable seat to accommodate various user heights. The controls are intuitively placed within easy reach, allowing operators to focus on mowing without distraction. The mower is also equipped with a built-in cup holder, providing convenience for long mowing sessions.

Another impressive characteristic of the Husqvarna YTH2448T is its low vibration design, which enhances comfort and reduces fatigue during use. The mower's construction also includes sound damping technology, resulting in a quieter operation, making it suitable for residential neighborhoods.

In conclusion, the Husqvarna YTH2448T is an exceptional riding lawn mower that combines power, comfort, and efficiency. With its reliable engine, wide cutting deck, advanced transmission, and user-friendly features, it stands out as an ideal choice for homeowners looking to keep their lawns in pristine condition. Whether you are a seasoned lawn care enthusiast or a novice, the YTH2448T promises to make lawn maintenance a breeze.
Top Page Image Contents