SERVICE AND ADJUSTMENTS

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

Raise attachment lift lever to highest position.

 

P

Q

P

 

 

M

K

R

 

L

Q

 

R

 

 

S

 

R

FIG. 29

TO REPLACE MOTION DRIVE BELT (See Fig. 30)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Disconnect clutch wire harness (A).

Remove anti-rotation link (B) on right side of tractor.

Remove belt from stationary idler (C) and clutching idler (D).

Remove belt from centerspan idler (E).

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

Remove belt downward from engine pulley and around electric clutch (G).

Slide belt toward rear of tractor, off the steering plate

(H) and remove from tractor.

BELT INSTALLATION -

• Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J).

• Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley (G).

• Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper.

• Install belt on centerspan idler (E).

• Install belt through stationary idler (C) and clutching idler (D).

22

Reinstall anti-rotation link (B) on right side of tractor. Tighten securely.

Reconnect clutch harness (A).

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

G

H

B

A

C

J

D

E

F

02953 electric

FIG. 30

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 31)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Page 22
Image 22
Husqvarna YTH2448T owner manual To Replace Motion Drive Belt See Fig, To Check Brake, Front Wheel TOE-IN/CAMBER

YTH2448T specifications

The Husqvarna YTH2448T is a robust and reliable riding lawn mower designed for homeowners who wish to maintain their lawns efficiently and effortlessly. Combining modern technology with user-friendly design, this mower delivers impressive performance while ensuring comfort during extended use.

One of the standout features of the YTH2448T is its powerful 24 HP Briggs & Stratton Intek engine. This engine provides ample power for tackling various lawn conditions, ensuring that the mower can handle tall grass and rugged terrain without sacrificing performance. The engine also features an automatic choke system, making it easy to start even in cold temperatures.

Equipped with a 48-inch cutting deck, the YTH2448T offers a wide cutting path, allowing users to cover more ground in less time. The deck is made from high-quality materials to ensure durability and is designed with a reinforced cutting edge to prevent wear and tear. Additionally, the deck features an adjustable cutting height, allowing users to choose the optimal height for their lawn.

The mower also incorporates an innovative hydrostatic transmission system that provides seamless acceleration and speed control. This technology eliminates the need for shifting gears, making it easier for users to navigate their lawns with precision. The YTH2448T also boasts a tight turning radius, allowing for maneuverability around obstacles such as trees and flower beds.

Comfort is prioritized in the design of the YTH2448T. The mower features an ergonomic seating position with an adjustable seat to accommodate various user heights. The controls are intuitively placed within easy reach, allowing operators to focus on mowing without distraction. The mower is also equipped with a built-in cup holder, providing convenience for long mowing sessions.

Another impressive characteristic of the Husqvarna YTH2448T is its low vibration design, which enhances comfort and reduces fatigue during use. The mower's construction also includes sound damping technology, resulting in a quieter operation, making it suitable for residential neighborhoods.

In conclusion, the Husqvarna YTH2448T is an exceptional riding lawn mower that combines power, comfort, and efficiency. With its reliable engine, wide cutting deck, advanced transmission, and user-friendly features, it stands out as an ideal choice for homeowners looking to keep their lawns in pristine condition. Whether you are a seasoned lawn care enthusiast or a novice, the YTH2448T promises to make lawn maintenance a breeze.