ASSEMBLY
TRANSAXLE | |
(S) LOCATION | BRACKET (T) |
LOCATED
BETWEEN REAR
TIRES
| S |
T | S. |
| T. TRANSAXLE BRACKET |
Fig. 10
NOTE: Depending on model, bracket (T) may be differ- ent than shown but hole for
•Pivot the integrated washer end of
•Secure with small washer and small retainer spring as shown.
|
| D. RIGHT SIDE | |
|
|
| REAR MOWER |
| T | S | BRACKET |
| S. | ||
|
| ||
D |
| T. | TRANSAXLE |
|
| BRACKET | |
|
|
| |
Fig. 11
6.ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS (See Fig. 12)
•Position front hole in side suspension arm (A) over pin on outside of tractor chassis and secure with large washer and large retainer spring (B).
•Repeat on opposite side of tractor.
|
|
| A.MOWER SIDE | |
|
|
| SUSPENSION | |
|
|
| ARMS | |
|
|
| B. RETAINER | |
|
|
| SPRING | |
|
|
| D. RIGHT | |
|
|
| SIDE REAR | |
D | A | B | MOWER | |
BRACKET | ||||
|
|
|
Fig. 12
7. ATTACH REAR LIFT LINKS (C) (See Fig. 13)
•Insert rod end of rear lift link (C) into hole (U) in tractor lift shaft suspension arm and pivot link down to mower.
•Lift rear corner of mower and position slot in link as- sembly over pin on rear mower bracket (D) and secure with large washer and large retainer spring.
•Repeat on opposite side of tractor.
U
C
| C. REAR LIFT LINK(S) | |
| D. RIGHT SIDE REAR | |
D | MOWER BRACKET | |
U. HOLE | ||
|
Fig. 13
8 ATTACH FRONT LINK (E) (See Fig. 14)
•Turn steering wheel to position wheels straight forward.
•From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F).
•Move to left side of mower and and insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F).
•Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and small retainer spring (J).
NOTE: Requires deck lifting.
FRONT LINK
LOCATION
M
H
F
G E
J
E.FRONT LIFT LINK ASSEMBLY
F.FRONT SUSPENSION BRACKET
G.LARGE RETAINER SPRING
H.FRONT MOWER BRACKET
J.SMALL RETAINER SPRING M. ENGINE CLUTCH PULLEY
Fig. 14
8
