Deck belt installation | Husqvarna Z18 manual

MAINTENANCE

Deck belt installation

NOTE: For ease in installing the deck belt, refer to the routing decal on bottom of seat.

•Wrap the deck belt around the electric clutch pulley that is located on the engine shaft.

•Route the belt forward between the EZT (E-Series Zeroturn Transaxles) and up onto the deck.

•Place belt around spring loaded idler pulley, between the pulley and guide. Secure bolt and nut.

•Starting on the right hand side of the deck, wrap the belt around the stationary idler pulley, the right mandrel housing, then around to the left mandrel housing.

•Push inward on the idler arm and carefully route belt over stationary idler pulley. Once belt is properly routed, slowly release idler arm to tension belt.

•Double check belt routing to make sure it matches the routing decal, and the belt does not have any twist. Correct as needed.

•Replace belt shields on both mandrel housings and secure with fasteners.

8011-773

1. Clutch pulley

Belt routing, deck belt

English-43

Image 45

Husqvarna Z18 manual Deck belt installation

Contents

English Z18Page OPERATOR’S Manual Rider Series Contents English Introduction Introduction Manufacturing Number Good Service Symbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Use Hearing Driving on Slopes Do as followsDo not Utility Box Children Maintenance Risk of sparking Transport Use protective glasses for maintenance work Customer responsibilities Controls ControlsControl Locations Tracking Motion Control Levers Fuses Seat adjustment knobs By pass linkages Refueling Blade switch Ignition Switch Choke ControlThrottle Control Hour Meter Parking BrakeMachine must be stopped before activating the parking brake Cutting height pedal Accessories Operation OperationTraining Starting the Engine Before Starting Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak battery Running Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle Cable Kohler engine Replacing the Air Filter Install the cover and tighten the knobs by Replacing the Fuel Filter Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking Brake Deck belt Checking the V-belts Deck belt installation EZT belt To replace EZT E-Series Zeroturn Transaxle beltEZT belt removal Checking the Blades Always use protective gloves when handling the blades Adjusting the Mower Deck To level deck Side-to-side adjustment Front-to-back adjustment To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels Hardware Lubrication Schedule Lubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesCaster wheels Engine Oil Briggs & Stratton Changing the Engine Oil Oil drain valve Checking the oil level Engine oil Kohler Changing the engine oil Transmission Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause Trouble Shooting Guide English-59 Storage ServiceStorage Winter Storage Wiring diagram Wiring Diagrams Technical Data Technical DataZ18 Equipment Torque Speciﬁcations Conformity Certiﬁcates Conformity Certificates Service Journal Service JournalDelivery Service Action After the First 5-8 Hours Hour Service English-69 Service Journal English-71 At Least Once Each Year Action Date, mtr reading, stamp, sign Service Journal English-75 ´z+RP¶6P¨ English-77 115 04 ´z+RP¶6P¨ ´z+RP¶6P¨