OPERATION
Moving by Hand
WARNING!
No adjustments or maintenance to be carried out unless:
-the engine stopped,
-the ignition key has been removed,
-the parking brake is on.
When pushing or pulling the mower, be sure to engage the IZT (Integraded Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.
•Raise the deck into the highest cutting position.
•Release the park brake prior to engaging bypass linkages.
•Pull the IZT bypass linkages out and put them into the slots so that it is held in the bypass position.
•To
1. IZT Bypass linkage Bypass linkages
1
2
CZ12
1.Head outside of rear deck
2.IZT Bypass linkage in bypass position
Bypass position
