OPERATING INSTRUCTIONS

NOTE: To begin motion the operator must be in the seat and the brake disengaged before the levers can be moved from the neutral slots or the engine will kill.

By moving the levers an equal amount forward or back the mower will move in a straight line in that direction.

Movement of the right lever forward will cause the right wheel to rotate in a forward direction. Movement of the left lever forward will cause the left wheel to rotate in a forward direction. To stop forward travel pull levers back into the neutral position.

To turn right while moving in a forward direction pull the right lever back towards the neutral position, this will slow the right wheel and cause the mower to turn in that direction.

To turn left while moving in forward direction pull the left lever back towards the neutral position, this will slow the left wheel and cause the mower to turn in that direction.

To zero turn pull one lever back beyond neutral while holding the other slightly ahead of neutral. NOTE: The direction of the zero turn will be determined by which lever is pulled back beyond neutral. Thus, left lever back, left turn and opposite for right turn. Use caution when using this maneuver unit can spin very rapidly if one lever is positioned too much ahead of the other.

3.Blade engagement switch: Located on the console. Pull up on switch to engage blades, push down to turn blades off. See page 3

4.Choke control: Located on the console. Pull out on knob to set choke. Use when starting cold engine do not run choke when engine is warm. See page 3

5.Throttle control: Located on the console. Used to control engine RPM. See page 3

6.Park brake: Located at the left end of the console. Pull lever back to engage the park brake, push lever forward to release brake. NOTE: Use tie downs when transporting unit, the park brake is not enough to hold the unit in place in this situation. See page 3

7.Key switch: Located on the console. The operator must be in the seat, park brake on, motion control levers out in the neutral slots and blade switch off before engine will start. See page 3

8.Fuel shut off valve: Located on the front of console at the top of the kick plate. The valve has three positions left tank, right tank and straight down is the off position. See page 3

9.Pump release valves: Located at the top left corner of the pumps. Used to release the system so unit may be moved by hand when not running. Tilt the seat up to gain access to the pumps. Rotate valve towards the front of the unit to release the system using a 5/8 wrench. NOTE: Only rotate about a 1/4 of a turn to release system.

11

Page 10 Page 12
Page 11
Image 11
Husqvarna ZTH5225A, ZTH6125A, ZTH5223A important safety instructions Operating Instructions
Page 10 Page 12

ZTH5225A, ZTH5223A, ZTH6125A specifications

Husqvarna, a renowned name in outdoor power equipment, offers a range of zero-turn lawn mowers, including the ZTH5223A, ZTH5225A, and ZTH6125A models. Each of these models showcases advanced technology and features designed to enhance lawn care efficiency and user comfort.

The Husqvarna ZTH5223A is equipped with a robust 23 HP Kawasaki engine, providing reliable power for tackling various lawn conditions. Its cutting deck spans 52 inches, making it nimble enough for tight spaces while ensuring a swift mowing experience. The fully adjustable seat, combined with ergonomic controls, ensures operator comfort during extended use. The ZTH5223A features a dual hydrostatic transmission, allowing smooth and responsive maneuvering.

Moving up to the ZTH5225A, this model boasts a slightly more powerful 25 HP Kawasaki engine. It retains the 52-inch cutting deck but introduces a premium suspension system to enhance ride quality over uneven terrain. The ZTH5225A also includes an advanced air filtration system, ensuring the engine operates efficiently while prolonging its life. Enhanced operator controls make this model intuitive to use, providing a seamless mowing experience.

The ZTH6125A stands out with its 61-inch cutting deck, making it ideal for larger properties. With a powerful 25 HP engine, this model combines power with efficiency, capable of tackling thick grass and more challenging landscapes. The ZTH6125A integrates a high-performance hydrostatic transmission, providing precise speed control and agility. The model also features a patented deck lifting system, allowing for easy height adjustments on-the-go.

All three models are designed with durability in mind, using premium-quality materials that stand up to the rigors of frequent use. They are equipped with easy-access maintenance points to simplify routines such as oil changes and blade replacement. Husqvarna’s commitment to technology is evident through their incorporation of features like the Air Induction mowing technology, ensuring an even cut and minimized clumping, regardless of grass type.

In summary, the Husqvarna ZTH5223A, ZTH5225A, and ZTH6125A offer a range of powerful features such as efficient engines, durable construction, and operator-centered designs. Whether for small residential lawns or expansive commercial spaces, these zero-turn mowers are engineered to deliver exceptional performance and a superior mowing experience.
Top Page Image Contents