hussman FMSS-L operation manual General Instructions, Table of Contents

IGSS-FMSS-L-0708

General Instructions

Table of Contents
General Instructions	2
Cut and Plan Views	3
Installation	3
Location	3
Uncrating the Stand	3
Exterior Loading	3
Setting and Joining	3
Leveling	3
Joint Trim	4
Bumper Installation Instructions	5
Plumbing	9
Waste Outlet and P-TRAP	9
Installing Condensate Drain	9
Refrigeration	9
Refrigerant Type	9
Refrigeration Lines	9
Control Settings - Remote	9
Control Settings - Self Contained	9
Access to TX Valves and Drain Lines	9
Electronic Expansion Valve (Optional)	9
Thermostatic Expansion Valve Location	10
Measuring the Operating Superheat	10
T-STAT Location	10
Ballast Location	10
Electrical	11
Wiring Color Code	11
Electrical Circuit Identification	11
Electrical Service Receptacles (When Applicable)	11
Field Wiring and Serial Plate Amperage	11
Ballast Location	11
User Information	11
Stocking	11
Important Steps	12
Case Cleaning	12
Cleaning Glass and Mirrors	12
Plexiglass and Acrylic Care	12
Cleaning	12
Antistatic Coatings	12
Maintenance	13
Replacing Fluorescent Lamps	13
Evaporator Fans	13
Copper Coils	13
Tips and Troubleshooting	13
Stainless Steel Cleaning and Care	13
Electrical Wiring Diagrams	14
Wiring Diagrams	15
Appendices	22
Appendix A. - Temperature Guidelines	22
Appendix B. - Application Recommendations	22
Appendix C. - Field Recommendations	22
Appendix D. - Recommendations to User	23

This Booklet Contains Information on:

FMSS-L, FMSS-L-L-Remote

The FMSS-L, FMSS-L-L is a single-deck, refrigerated, self-service merchandiser, which offers additional related display when positioned in front of a “Parent” service case. The FMSS-L, FMSS-L-L only fits under Hussmann Chino Style cases.

Shipping Damage

All equipment should be thoroughly examined for shipping damage before and during unloading.

This equipment has been carefully inspected at our factory and the carrier has assumed responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.

Apparent Loss or Damage

If there is an obvious loss or damage, it must be noted on the freight bill or express receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim. The carrier will supply necessary claim forms.

Concealed Loss or Damage

When loss or damage is not apparent until after equipment is uncrated, a claim for concealed damage is made. Make request in writing to carrier for inspection within 15 days, and retain all packaging. The carrier will supply inspection report and required claim forms.

Shortages

Check your shipment for any possible shortages of material. If a shortage should exist and is found to be the responsibility of Hussmann Chino, notify Hussmann Chino. If such a shortage involves the carrier, notify the carrier immediately, and request an inspection. Hussmann Chino will acknowledge shortages within ten days from receipt of equipment.

Hussmann Chino Product Control

The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and replacement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial number of each piece of equipment involved, in order to provide the customer with the correct parts.

Keep this booklet with the case at all times for future reference.

/CHINO

A publication of HUSSMANN® Chino

13770 Ramona Avenue • Chino, California 91710

(909)628-8942 FAX

(909)590-4910

(800)395-9229



This equipment is to be installed to comply with the applicable NEC, Federal, State,and Local Plumbing and Construction Code ha ving jurisdiction.