Hand Held Device

PROTOCOL™

 

CONFIG MENU (continued)

 

5- LIGHT CONTROL

Press 5 on the Keypad to enter the Light Control Submenu.

1-CIRCUIT #1

Press 1 or 2 on the Keypad to enter the Circuit # Submenu.

This screen programs lighting controls on one cir- cuit.

Use the key to toggle between ENABLED / DISABLED to activate the lighting function. Press

ENT.

Using the ENT key, move down the selections.

Press CLR. Key in your selection and press ENT. The cursor will move down to the next sensor.

NAME identifies the lights on this circuit.

ONTIME controls when the lights turn on.

OFFTIME controls when the lights turn off.

OUTPUT controls the relay used by these PowerLinks™ (lighting circuit breakers).

Press ESC to return to LIGHT MENU.

Press ESC again to return to CONFIG MENU.

P/N 374511B

Page 21

CONFIG MENU

1-SET THE CLOCK

2-SENSOR SETUP

3-PROTOCOL SETUP

4-COMM SETUP

5-LIGHT CONTROL 6-TEMP CONTROL

LIGHT MENU

1-CIRCUIT #1

2-CIRCUIT #2

LIGHT CIRCUIT #1

STATUS – ENABLED

NAME – CASE LTS

ONTIME – 04:00

OFFTIME –- 22:00

OUTPUT –- 08

970307

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)