Hand Held Device

PROTOCOL™

 

CONFIG MENU (continued)

 

3- DESCRIPTION

Press 3 on the Keypad to enter the Description Submenu.

This screen provides for a 16 character description of the Protocol unit for user identification on Hussnet™.

Press the CLR key.

Key in the description . Press Shift Upper to use the red (upper) letters and Shift Lower to use the blue (lower) letters.

Press ENT.

Press ESC to return to PROTOCOL SETUP MENU.

Press ESC again to return to CONFIG MENU.

4- ALARM OUTPUT

Press 4 on the Keypad to enter the Alarm Output Submenu.

The alarm output feature allows one of the 24 available outputs to be energized during the occurance of any alarm (High/Low Pressure, High/Low Temp, etc.)

The output number refers to a relay which is wired into the main Protocol Alarm Relay (AR).

Key in the number (between 1 and 24). Make sure that the output is available and not being used by another function (defrost, lighting or temperature control).

Press ENT.

Press ESC to return to PROTOCOL SETUP MENU.

Press ESC again to return to CONFIG MENU.

P/N 374511B

Page 19

PROTOCOL SETUP

1-REFR SETUP

2-DEFR SETUP

3-DESCRIPTION

4-ALARM OUTPUT

CONFIG - DESCRIPTION

NAME -

PROTOCOL SETUP

1-REFR SETUP

2-DEFR SETUP

3-DESCRIPTION

4-ALARM OUTPUT

ALARM OUTPUT

OUTPUT NUMBER – X

970307

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)