igfP-R3, R3P-0608
6
installation (cont'd)
wrapping Boards installation instructions
Step 1: Measure 6 inches from wrapping board end. Step 2: Measure 10 inches from top of the case.
note: line up 6 inch mark with 10 inch mark.
Step 3: Use bracket center hole to align with cross mark.
note: Use pencil/marker to mark hole pattern.
HOLE PATTERN
Step 4: Drill holes (7/32”)
Screws # 14 X 1”
Step 5: Install bracket with screws (provided)
note: Repeat Steps 1 thru 5 for Second Bracket installation.