Hustler Turf M1 owner manual

WARNING: Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves and use extra caution when servicing them.

1.Attach the lower handle  to the mower with flanged nuts. Fig. 4-2

6

3

Fig. 4-2

2.Assemble the upper handle to the lower handle . Use the holder 13 on the right hand side and the two bolts  on the left hand side and the flanged cap nuts .Fig. 4-3and Fig. 4-4

3.Remove the lower bolt and attach the bar 11 to the mower as shown. Fig. 4-5. Start the bolt in the hole but do not tighten. Install the bracketto the lower handle and attach the bar 11 using hardware and (flanged cap nutnot shown). Tighten all of the hard- ware. Fig. 4-5and Fig. 4-6

11

Lower bolt

Fig. 4-5

Lower handle

7

3

11

10

Upper handle 13

Fig. 4-3

Upper handle

9

7

3

Fig. 4-4

8

Fig. 4-6

NOTE: When adjusting the height of the handle, loosen the bolt on the bar 11 , before loosening the handle height adjust- ment bolt. Fix the cable harness to the handle with velcro straps so that they do not interfere with the opening / closing of the guard or operation of the machine. The cable harness should be routed under the lower handle. Fig. 4-7 and Fig. 4-8

Loosen bolts to

adjust height

Fig. 4-7

4-4 108548_0711