Hustler Turf M1 General Information, Service Literature, Using this manual, Standard Torques

General Information

This Manual covers the Hustler M-1 model 929208.

Service Literature

PART NO.	DESCRIPTION
108548	OWNER’S MANUAL
601825	HONDA GXV160 ENGINE MANUAL

Note: When ordering parts, you must use the part number as shown for each part, not the index number. Always give the model and serial number to your parts and service representative.

Using this manual

Illustrations used were current at the time of printing, but subsequent production changes may cause your machine to vary slightly in detail. Excel Industries, Inc. reserves the right to redesign and change the machine as deemed neces- sary, without notification. If a change has been made to your machine which is not reflected in this parts manual, see your Hustler dealer for current information and parts.

Standard Torques

The following chart lists the standard torque values for the threaded fasteners found in this manual. Torque all cap screws, nuts and set screws to these values unless a different torque is shown in the Notes section next to the fastener.

SIZE	FT-LBS	N-M
.250	8.2	11.1
.312	17	23
.375	30	40
.438	48	65
.500	73	99
.562	105	143
.625	145	200
.750	260	350
.875	420	565
1.00	625	850

SIZE	FT-LBS	N-M
M3	1	1.3
M4	2.2	3
M5	4.5	6.1
M6	7.7	10.4
M8	18.5	25
M10	37	50
M12	64	87
M14	80	108.5
M16	160	215
M20	320	435
M24	555	750

108548_0711 6-3