Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server Hardware LPT1, LPT2, COM

♦Power/Tx

◊Steady or flashing green confirms that the HyperNet Fastprint is powered on.

◊The indicator blinks off briefly to indicate that the HyperNet Fastprint is transmitting to the network.

♦Link/Rx

◊Steady or flashing green confirms that the HyperNet Fastprint has a good connection to the Ethernet or Fast Ethernet network.

◊The indicator blinks off briefly to indicate that the HyperNet Fastprint is receiving from the network.

♦LPT1, LPT2, COM

◊These LED indicators light to show that the HyperNet Fastprint is transferring print data through the appropriate parallel or serial port.

These three indicators are also used by the print server’s power-on self test (POST) to indicate any hardware failures.

4 Index