Playback
∙You can choose either tape or tape for playback.
∙Set Function switch to TAPE position.
∙Put in your cassette tape.
∙Press PLAY button to activate playback.
∙Adjust volume regulator to the appropriate level as desired.
∙Press STOP/EJECT button when finished.
Continuous playback (only running from “A” to “B”)
∙Set Function switch to TAPE position.
∙Put in your cassette tapes.
∙Press PLAY button of the desk .
∙Press PAUSE button and PLAY button of the deck .
∙Adjust volume regulator to the appropriate level as desired.
∙When tape reaches its end and store, tape starts playing back automatically stop.
AUTO STOP
∙At the end of the tape during the playback and record operations, the forward and rewind operations the auto stop system will function and disengage the mechanism.
Recording (deck “B” only)
Recording from tape A to tape B
∙Insert a
∙Insert a blank cassette tape with full reel on the right into desk .
∙Set Function switch to TAPE position.
∙Press PAUSE button and RECORD button of the tape . To start recording press PLAY button of the tape and press RAUSE button of the tape . Then both tapes start dubbing synchronously.
∙Adjust VOLUME regulator for monitoring purpose.
∙To stop dubbing, press both STOP/EJECT button.
Recording with built-in microphone
∙Insert a blank cassette tape into the desk .
∙Set Function switch to TAPE position.
∙Press RECORD button.
∙Speak in a normal voice at a distance of approximately 30 cm from the
4
