Hyundai H-CDM8043 instruction manual Mask DPI

Models: H-CDM8043

1 63
Download 63 pages 1.04 Kb
Page 15
Image 15

c.Retune mode

To determine the initial time of automatic TA (Traffic Announcement) search.

There are 2 modes: RETUNE L and RETUNE S.

-RETUNE L: 90 seconds.

-RETUNE S: 30 seconds.

Note: Retune mode is active for TA SEEK mode only.

d.Mask mode

During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the misjudgment of the radio under interference. Rotate the VOLUME knob to select the desired mode: MASK DPI M and MASK ALL.

-MASK DPI

To mask only the AF with different PI.

-MASK ALL

To mask both PI and strong signal non-RDS station.

e.Beep mode

There are 3 modes: BEEP 2’nd, BEEP ALL and BEEP OFF.

-Beep 2nd: the beep is only generated when an allotted double key is pressed long (1 sec)..

-BEEP ALL: enable audible beep tone when any function is accessed.

-BEEP OFF: disable audible beep tone when any function is accessed.

f.Seek mode

You can choose from Seek tuning mode 1 and mode 2.

While the desired Seek tuning mode is selected, the following operations can be performed:

-SEEK1: Press and hold the / button to seek the band in up or down direction and stop when a station is received.

15

Page 15
Image 15
Hyundai H-CDM8043 instruction manual Mask DPI