A.P function (Auto storage/ Preset memory scan)
Preset scan: press A.P button for less than 1 second to scan all preset stations in the memories of the current band and stay on each memory stations for about 5 seconds. The memory location indicator on the LCD will flash during the process. To stop preset scan, press A.P button again.
Auto memory store: press A.P button for more than 2 seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press A.P button again. When the
Scan function
Press it to scan up by one channel step with station detection. If a valid signal has detected, the current frequency is blinked within 5 seconds, then press it again to stop scan and remain the current frequency; otherwise, the unit continue to scan up by one channel step with station detection 5 seconds later.
AF function (Alternative Frequencies)
AF mode: Press AF button shortly to turn on or turn off the AF function. If the AF function is on the display will show “AF”. When AF switching mode is selected, but RDS information is not received yet the “AF” will be flashing.
The RDS program will be automatically searched and received. After turning on, if the RDS signal is week or even no signal, the unit will search another frequency with this RDS program.
Region mode: Press and hold AF button for one second, the unit will be under REGION ON or REGION OFF mode:
-REGION ON: PI code will be searched during AF searching. The display will show “REG ON”.
-REGION OFF: PI code and covered area will not be searched.
19
