ROCK => FLAT.

Keep pressing SEL/VOL knob for 2 seconds to select the RDS function:

TA SEEK/ALARM => RETUNE L/S => MASK DPI/ALL.

￿￿TA (Traffic Announcement) mode

To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) information for 5 seconds. Rotate the VOL/SEL knob to select the desired mode: TA ALARM and TA SEEK.

-TA SEEK

When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information.

-TA ALARM

During searching the radio does not retune but the double beep sound (alarm) is output.

￿￿RETUNE mode

To determine the initial time of automatic TA (Traffic Announcement) search. There are 2 modes: RETUNE L and RETUNE L.

-RETUNE L: 90 seconds.

-RETUNE S: 30 seconds.

Note: Retune mode is active for TA SEEK mode only.

￿￿MASK mode

During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the misjudgment of the radio under interference. Rotate the VOL/SEL knob to select the desired mode: MASK DPI and MASK ALL.

- MASK DPI

15

Page 15
Image 15
Hyundai H-CMD7079 instruction manual Rock = Flat