Hyundai H-CMD7079 instruction manual Bluetooth operations

Bluetooth operations

Pairing

First, make sure the bluetooth function in your headset is set to “ON”. Then press and hold PHONE button until “PAIRING” blinks on the display waiting for the bluetooth device to connect. At this time, please run the bluetooth search and connect function in your cell phone. The unit model number will be shown on the cellphone as “BT car stereo”. Select this item and connect.

When you are asked for a connection password, please input “0000” in your cellphone to finish the pairing. The bluetooth icon will be shown on the LCD indicating that the bluetooth function is ready to use.

Dialing on the front panel or on the RC

When you want to dial a call on the front panel or the RC, press PHONE button on the front panel or the RC, then press the numeric buttons 1-0 on the front panel or the RC to input the telephone number of the receiving party. Press ANSWER button to activate the call. In case the call cannot be established, the unit will automatically redial until you press END CALL button.

Redial

Press ANSWER button to call the most recent dialed number so that you can repeat recent call easily.

Disconnecting the phone

After pressing PHONE button, press VOL/SEL knob three times to cycle through to “DIS CONN”. Press and hold SEL button to disconnect the current connection phone so that you can connect another one.

Incoming Call Display

Anytime when there is an incoming call, the LCD display will show the incoming number.

38