Hyundai H-CMMD4044 Handling discs, Cleaning the cabinet and panel, Cleaning discs

Models: H-CMMD4044

1 78
Download 78 pages 8.07 Kb
Page 34
Image 34

Handling discs

￿￿Dirty, scratched or warped discs may cause skip ping or noise.

￿￿Handle the disc only by the edges. To keep clean do not touch its surface.

￿￿Discs should be stored in their cases after use to avoid scratches.

￿￿Do not expose discs to direct sunlight, high humidity, high temperature or dust.

￿￿Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime).

￿￿Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felt-tip pens, may damage its surface.

￿￿DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection sheet to either side of a disc.

Cleaning

Cleaning the cabinet and panel

Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy water, and then wipe clean.

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.

Cleaning discs

Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth should remove must panicles. Wipe in a straight motion from the center to the edge.

Never use thinner benzine, record cleaner or anti static spray on a compact disc. Such chemicals can damage its plastic surface.

34

Page 34
Image 34
Hyundai H-CMMD4044 instruction manual Handling discs, Cleaning the cabinet and panel, Cleaning discs