W220S
Multi Function 2D/3D Wide Monitor
• For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before
| viewing it (Monitor Manual: see 21 page). |
| Viewing on a different mode may decrease 3D effects. |
| • On 1:1 mode, the screen size changes according to the input resolution. |
| It doesn't mean that it has some problems with it. It just operates 1:1 mode |
| without scaling the input signal. |
6. Q&A for 3D Mode | 1. There is something like oil stain on the monitor screen. |
| It is due to interferences of light waves within the air layers between the |
| surface of LCD and the 3D filter. It is not defective. |
| 2. 3D stereoscopic images are seen as two separate images. |
| When you don't wear 3D glasses enclosed Please use the 3D glasses. |
| When you view it away from visual angle. |
| - To view 3D stereoscopic imaging optimally, you'd better keep the distance of |
| 60 cm |
| - 1m from the monitor screen. |
| - If you exceed 75° out of the left/right visual angle or 10° out of the |
| top/bottom visual angle while viewing 3D images, you cannot enjoy 3D images |
| properly. So keep the visual angle as provided above. |
6/27
