Hyundai IT HQL260WR How to Set PIP Mode, This function is available only with the remote control

PICTURE SETUP

How to Set PIP [Mode]

-You can watch another device's image in the PIP while watching the TV, S-Video, DTV, Scart1/2 or VIDEO in the main image.

-This function is available only with the remote control.

PIP	Press the PIP button.
	You will see the PIP at the upper right corner.							PIP
							Main
INPUT	Press the INPUT button, then input source
	changes in order below.
	TV	SCART1(F)		SCART2(H)		AV1 VIDEO
	AV1 S-VHS		AV2 VIDEO		DTV	PC

In case of TV mode, you can change the main or PIP TV channel by pressing the Up and Down buttons.

	Press the Position button, then position
POSITION			4		1
	changes in order below.
				5
	Right Up	Right Down Left Down
	Left Up	Center
			3		2

SIZE	Press the SIZE button.
	The PIP will change among 6 different sizes
	whenever you press this button.

P.MODE	Press the P.MODE button, then PIP picture mode
	changes in order below.

Standard Sport Natural Mild Custom

-Main and sub pictures cannot have the same input source.

-While PIP is on, any change to Picture or Geometry in the OSD control menu is applied only for the PIP function. If you wish to make adjustment to Picture or Geometry in the main image, please make sure the PIP function is off.

37