73

FUNCTION SETUP
3
MENU
4
4
EXIT
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to
“FUNCTION” icon.
Press Left and Right buttons to select
“FUNCTION”.
Press Up and Down buttons to move to
“PIXEL SHIFT” or “FULL WHITE”.
Press Left and Right buttons to
“ON/OFF”.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
While FULL WHITE is activated, if you wish to switch the mode to Off or wish to use other function,
press any of buttons on the remote control unit or any of control keys on the PDP unit. Then the
menu screen will appear again. Press the left or right button to deactivate the current mode.
FUNCTION
ASPECT RATIO
KEY LOCK
PIXEL SHIFT
FULL WHITE
DPMS
LANGUAGE
IMAGE ADJUST
AUTO CHANGE
AUTO SIZE
WIDE
OFF
OFF
OFF
OFF
ENGLISH
OFF
OFF
MOVESELECT MENU
WIPER
Using the Pixel Shift / Full White / Wiper Function

This feature is designed to reduce image sticking effects during displaying a static picture.

(Brightness degradation is caused by the scale effects of a panel, which is characteristic of a PDP.)

How To Directly Select Wiper :Press button.

The image sticking (brightness degradation) is eliminated as white bars are moving in the right direction.
It may take from several minutes up to several hours to remove the image sticking. If a fixed pattern is displayed for a
long time, you can prevent the latent image by switching FULL WHITE to On for 2 or 3 minutes on a hourly basis.
The image sticking effect is influenced by the brightness of a fixed pattern and its display time. It is recommended that
you reduce the level of the brightness by using picture controls (See page 36) when a fixed pattern is displayed for a
long time.
1
2
FUNCTION
ASPECT RATIO
KEY LOCK
PIXEL SHIFT
FULL WHITE
DPMS
LANGUAGE
IMAGE ADJUST
AUTO CHANGE
AUTO SIZE
WIDE
OFF
OFF
OFF
OFF
ENGLISH
OFF
OFF
MOVESELECT MENU