79

FUNCTION SETUP
Using the Auto Change

When watching your TV (pay channels) in Full Scart, CH information OSD is displayed on the screen in the same way as

TV Mode.

1
2
3
- If you put AUTO CHANGE into ON while watching TV, the current mode is automatically switched to Full Scart
to display signals that come into Full Scart on the screen. However, there is no input signal to Full Scart, no
switching to Full Scart occurs.
- In other AV Mode than TV Mode, putting AUTO CHANGE into ON won’t switch the current mode to Full Scart.
- When AUTO CHANGE is OFF, F SCART-CHANNEL NO is displayed on CH information OSD on the screen.
MENU
4
EXIT
Press Menu button.
Menu items appear on the screen.
Press Up and Down buttons to move to
“FUNCTION” icon.
Press Left and Right buttons to select
“FUNCTION”.
Press Up and Down buttons to move to
“AUTO CHANGE”.
Press Left and Right buttons to
“ON/OFF”.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
FUNCTION
ASPECT RATIO
KEY LOCK
PIXEL SHIFT
FULL WHITE
DPMS
LANGUAGE
IMAGE ADJUST
AUTO CHANGE
AUTO SIZE
WIDE
OFF
OFF
OFF
OFF
ENGLISH
OFF
OFF
MOVESELECT MENU
FUNCTION
ASPECT RATIO
KEY LOCK
PIXEL SHIFT
FULL WHITE
DPMS
LANGUAGE
IMAGE ADJUST
AUTO CHANGE
AUTO SIZE
WIDE
OFF
OFF
OFF
OFF
ENGLISH
OFF
OFF
MOVESELECT MENU