32
These fields control the resource assignments of two
on-board serial interfaces SIO1 and SIO2. The following lists
show current options in On Board Serial Port 1/ Port 2:
Auto Æ cannot set serial I/O resources by manual operation
Disabled Æ indicates on-board COM port function is
ineffective
3F8h/COM1 Æ assign I/O address 3F8h to COM1
2F8h/COM2 Æ assign I/O address 2F8h to COM2
3E8h/COM3 Æ assign I/O address 3E8h to COM3
2E8h/COM4 Æ assign I/O address 2E8h to COM4
On Board FIR Port
This option allows you to enable / disable the onboard Fast
Infrared(FIR) interface
FIR IRQ Select
This option is only valid if the Onboard FIR Port option is set to
Enabled. This option sets the IRQ used by the FIR port.
FIR DMA1 Select
This option is only valid if the Onboard FIR Port option is set to
Enabled. This option sets the DMA1 channel used by the FIR
port
On Board Parallel Port
There are four optional items Parallel Port Mode, EPP Version,
Parallel Port IRQ, and Parallel Port DMA Channel used to
control on-board parallel port interface while user select I/O
base address manually. The following lists are available
options of on-board parallel port:
Auto Æ user can not control all of LPT port I/O resources